A 16mm CNC stirrup bender must be matched to more than nominal bar diameter. Rebar strength, surface condition and coil quality can change the feeding and bending task. For HH6-16S enquiries, Haihui recommends supplying material information together with the intended shapes so the proposed configuration can be assessed.
Send material information with the enquiry
Provide the applicable steel designation and a material certificate if available. Tell the supplier whether the bar is ribbed or smooth, its nominal diameter and how it is supplied. If several grades are used, list each one separately. This avoids treating all 16mm stock as if it behaved identically.
Describe the coil and payoff arrangement
Record coil dimensions, approximate weight and the available handling method. Explain how the coil will be loaded and positioned in the workshop. Ask the manufacturer which payoff arrangement is proposed and what space it requires. Material preparation and safe handling must fit the complete line, not just the bending unit.
Check the drawing against the material
Send bend dimensions, hook details and required tolerances. The supplier should review tooling and bending requirements together with the steel information. Tight corners and short sides may need particular attention. Where the design is structural, use the approved project drawing rather than changing geometry simply to suit the machine.
Keep a record of the trial conditions
An informative sample test records material identity, القطر, settings, tooling and measurements. Keep representative finished pieces or clear measurement photographs. If delivered stock differs from the tested stock, ask the supplier whether another setup or trial is necessary before starting a large production batch.
سؤال متكرر
Does nominal diameter alone confirm compatibility? لا. Steel properties, supply condition, tooling and the requested shape also need review.
Discuss your 16mm rebar processing requirements with Haihui
شركة شينغتاي هايهوي للأدوات الآلية المحدودة, المحدودة. is based in Xingtai, خبي, الصين. Review the HH6-16S CNC rebar stirrup bending machine and send your steel grade, القطر, drawings and destination for a configuration-specific discussion. Learn more about Haihui.
Call +86 13932960232 أو contact Haihui on WhatsApp: +86 13932960232 for technical questions and a quotation.