Quick answer: Haihui 13E is an automatic CNC stirrup bender for rebar workshops that need repeatable feeding, الانحناء, والقطع. Its reference capacity is 5–13 mm for single-line processing and 5–10 mm for double-line processing. Reference output is 1,800–2,000 pieces/hour single-line and 2,000–2,400 pieces/hour double-line, subject to product and setup.
13E reference specification table
| مواصفة | Reference value |
|---|---|
| Single-line round bar range | 5–13 mm |
| Double-line round bar range | 5-10 ملم |
| Single-line output | 1,800–2,000 pieces/hour |
| Double-line output | 2,000–2,400 pieces/hour |
| Total rated power | 36.5 kW reference |
| Power supply | 3-phase 380 V / 50 Hz reference; confirm local configuration |
| Gross weight | About 2,000 kg reference |
Values above are from a reference parameter sheet. Product brochures can differ by configuration and revision. Confirm the delivered machine’s processing limits, voltage, and included equipment on the proforma invoice and signed technical offer.
Choosing a line mode
Single-line mode accepts the wider reference diameter range, حتى 13 مم. Double-line mode handles two bars in a narrower 5–10 mm range and may suit repeat production of compatible stirrups. The faster published double-line range should be treated as an example rather than a guaranteed shift rate. Bar diameter, shape perimeter, bend count, cut length, feed setup, and material loading all affect actual output.
Typical production fit
The 13E can be considered by rebar fabrication shops and construction suppliers producing stirrups in batches. It is useful to compare it with the smaller HH4-14S model using your actual diameters and product drawings. A higher diameter limit does not automatically mean the best choice: the decision should also account for the most common bar size, daily volume, available floor space, electrical service, and preferred feeding workflow.
What to provide when asking about 13E
- Drawings for your top three stirrup types
- Bar diameter and grade for each product
- Target pieces per shift and number of shifts
- Country power standard and factory supply details
- Requested accessories, تمرين, and service expectations
For a model review, contact Haihui on واتساب +86 139 3296 0232 أو 417786525@qq.com.
Frequently asked questions
What is the 13E’s maximum reference diameter?
13 mm in single-line mode; the published double-line range is 5–10 mm.
Does double-line mode always produce more parts?
No. It can improve throughput for compatible designs, but the output depends on the shape, القطر, cut length, machine settings, and handling.
Is 380 V / 50 Hz the only option?
It is the reference supply shown in the parameter sheet. Ask Haihui to confirm the electrical configuration for the destination country before ordering.