Tipo de caso: Ejemplo de planificación de aplicaciones.
Fabricante: Máquina herramienta Co. de Xingtai Haihui., Limitado. (Maquinaria Haihui), Xingtai, hebei, Porcelana.
A reinforcement workshop preparing stirrups for concrete beams needs repeatable shapes, clear batch identification and a practical route from incoming coils to finished bundles.
Start with the beam reinforcement schedule
Group the drawings by bar diameter, grado de acero, leg dimensions, hook details and quantity. Identify the shapes that repeat across beam types. Send the complete drawing references to the manufacturer so equipment selection follows the actual reinforcement schedule.
Match the bending process to the material
A coil-fed automatic stirrup bending machine may combine feeding, alisar, bending and cutting in a programmed sequence. Confirm the permitted diameter and material strength for the specific configuration. Hook geometry, minimum dimensions and any unusual shapes also need individual review.
Validate the first production batch
Run representative programs and measure samples at defined points. Check the finished leg lengths, angles and cut quality against the approved drawing. Record the material and program settings so the workshop has a clear reference when the next batch is produced.
Organize finished stirrups for assembly
Keep different beam references separated and label bundles by drawing revision and quantity. Plan collection so finished pieces do not obstruct the operating area. Assess useful output over a complete batch, including setup and handling, rather than relying only on a peak feeding-speed figure.
Pregunta de aplicación
What should a beam reinforcement workshop send to the factory?
Provide the steel grade and diameter, approved stirrup drawings, typical batch size, daily production target and electrical supply. Include the destination when requesting a complete supply quotation.
Póngase en contacto con la fábrica de fuentes Haihui
Revisa nuestro máquinas de procesamiento de barras de refuerzo y información del fabricante. Envía tu dibujo, grado de acero, diámetro, objetivo de producción, suministro eléctrico y destino de entrega para una revisión de configuración.
Teléfono / WhatsApp: +86 13932960232. Póngase en contacto con Haihui en WhatsApp para obtener una cotización de fábrica.