HH4-14GT rebar straightening and cutting machine by HAIHUI is designed to straighten coil-fed round and deformed steel bar and cut it to length. The listed configuration supports round bar from 4–14 mm and deformed rebar from 4–12 mm, with inverter speed settings of 40, 80 ou 100 m/min. Share your bar grade, required cut lengths and production targets to confirm the machine configuration for your project.
HH4-14GT rebar straightening and cutting machine overview
The HH4-14GT combines a straightening feed path with a cutting unit for preparing reinforcement bar in workshops, construction supply yards and standard-parts processing facilities. The source listing describes variable-frequency speed control and a high-speed operation setting up to 100 m/min. A rotary knob is listed for speed adjustment. Actual line speed and output depend on bar material, diamètre, straightness requirements, cut-length program and operating conditions.
Key features
- Wide bar-size coverage: listed for 4–14 mm round steel bar and 4–12 mm deformed rebar.
- Variable-frequency speed settings: listed operating speeds are 40, 80 et 100 m/min, adjusted by a knob.
- Straightening and cut-to-length: processes coil-fed reinforcement into straight lengths for downstream fabrication.
- Short cut length: the listing specifies a minimum cut length of 10 mm; confirm the achievable length for the selected bar size and material.
- Compact industrial configuration: listed machine weight is 1,000 kg and rated power is 24 kW.
HH4-14GT specifications
| Spécification | Published value |
|---|---|
| Model | HH4-14GT |
| Machine type | High-speed rebar straightening and cutting machine |
| Round bar range | 4–14 mm |
| Deformed rebar range | 4–12 mm |
| Listed line speeds | 40 / 80 / 100 m/min |
| Speed adjustment | Rotary knob; inverter speed control stated in the listing |
| Rated power | 24.0 kW |
| Machine weight | 1,000 kilos |
| Minimum cut length | 10 mm (confirm by material and setup) |
| Listed cutting error | Less than 1 mm (confirm test conditions and tolerance) |
| Alimentation | Three-phase, four-wire |
These values reflect the supplier’s product listing. Confirm the applicable bar grade, straightness tolerance, cut-length range, production rate, electrical supply and delivered configuration in a written quotation. In particular, verify the stated cutting tolerance under the conditions of your intended application.
Typical applications
A high-speed rebar straightening and cutting machine can support reinforcement preparation for construction sites, railway projects and standard-parts processing plants. The HH4-14GT is listed for jobsite, railway and standard-parts factory applications. Confirm that your coil dimensions, nuances d'acier, target piece lengths and daily production volume fall within the machine’s operating limits.
What to confirm before ordering
Send the supplier your bar sizes and grades, coil details, required cut lengths, acceptable length tolerance, target output per shift and available floor space. Ask for a layout drawing, utility requirements, operating and maintenance instructions, tooling details, installation requirements, warranty terms and a production test using representative material. This helps confirm whether the 40, 80 ou 100 m/min setting is appropriate for your application.
Questions fréquemment posées
What is the model number?
The product listing identifies the machine as HH4-14GT.
What bar sizes can it process?
The listing gives 4–14 mm for round bar and 4–12 mm for deformed rebar. Confirm your exact material and setup with the manufacturer.
What is the maximum listed speed?
The product listing shows speed settings of 40, 80 et 100 m/min. Actual throughput depends on bar type, cut length and operating conditions.
What power supply does it require?
The listing states 24.0 kW rated power and a three-phase, four-wire supply. Confirm the required voltage and electrical details before installation.
Request HH4-14GT configuration details
Send Haihui your bar sizes, nuances d'acier, target lengths and production requirements to confirm the HH4-14GT configuration and request a quotation. Contact Haihui Machinery for technical consultation.