Resposta rápida: Choose a CNC rebar stirrup bending machine by matching the bar diameter and grade, stirrup geometry, feeding method and target batch size to the machine configuration. Ask the manufacturer to test a representative drawing and material before confirming the model.
Start with the workpiece, not the headline speed
Prepare drawings for your common shapes and note bar diameter, nota, hook direction, leg lengths and required tolerances. Include both a routine shape and the most demanding shape in your order mix. The machine’s workable range depends on its specific configuration and tooling.
Compare single-line and paired production
Single-line operation can suit a varied product mix and frequent program changes. Paired production may increase output for compatible diameters and repeatable shapes, but only when the machine and tooling are designed for those parts. Ask the factory to confirm the supported mode against your drawing.
Agree the sample test
Use the same bar grade, diameter and drawing revision that you expect to run. Measure the finished piece with an agreed method, and record cycle conditions, tooling and any setup changes. This gives both buyer and manufacturer a clear reference for production planning.
Perguntas frequentes
Can one machine produce several stirrup shapes?
Many CNC systems store multiple programs; the feasible shapes still depend on machine range, ferramentas, bar size and geometry.
What should I send for a quotation?
Send bar specifications, desenhos, desired output, feeding method, fonte de alimentação e destino.
Entre em contato com a maquinaria Haihui: Telefone / WhatsApp +86 139 3296 0232. Share your drawing for a model review and sample-test discussion.
