HAIHUI · APPLICATION PLANNING CASE
This is an illustrative equipment application, not a report of a named customer order or verified operating results. The product image shows Haihui equipment, not an installation at the illustrative site.
Application at a glance
A precast yard assembles reinforcement meshes from straight bars in several lengths. This application plan considers how a coil-fed straightener could prepare identified batches for a separate mesh assembly process.
| Элемент | Requirement |
|---|---|
| Finished output | Straight cut bars for downstream mesh assembly |
| Critical variables | Bar grade, диаметр, cut lengths, straightness and quantity |
| Candidate equipment | Хайхуэй 85 m/min rebar straightening and cutting machine |
| Separate operations | Mesh positioning, tying or welding and final mesh inspection |
Turn the mesh schedule into cut-bar batches
The proposed workflow starts with an approved cut list grouped by steel grade and diameter. Each length receives a job identifier, required quantity and destination assembly station. Bars of similar length should have distinct labels and collection locations. This is a planning method, not a claim about automatic sorting or label printing on the machine.
Match the straightener and receiving arrangement
Haihui’s current 85 m/min product page lists a 5–14 mm reference bar range, subject to material suitability. Send the complete length range and tolerances for confirmation. Ask for a receiving arrangement that supports the longest cut bar and allows shorter batches to be collected without mixing. Confirm rack inclusion in the quotation.
Check straight bars before mesh assembly
A trial should inspect the cut length and straightness using an agreed measuring method. Record material identity with the accepted batch, then check that the assembly team can select the correct bars. The straightener does not perform the downstream mesh joining operation; any mesh equipment and acceptance requirements must be specified separately.
Estimate capacity from the bottleneck
Nominal feed speed is only one input. Cutting cycles, замена катушки, collection and movement to assembly affect usable output. Request a timed sample run that includes the shortest and longest regular cuts. Compare accepted bars delivered to the assembly station with demand there, rather than treating 85 m/min as a finished-mesh production figure.
Related equipment and product category
Просмотрите 85 m/min Rebar Straightening and Cutting Machine | 5–14 мм for current product information, and browse the Машина для выпрямления стальных прутков category. Model selection should be based on the actual material, drawing and agreed configuration.
Application FAQ
Does this configuration automatically manufacture welded mesh?
Нет. The selected listing is for straightening and cutting. Mesh assembly and joining require separate equipment and procedures.
What should I send Haihui for a similar application?
Send dimensioned drawings, material grade and sizes, target batch quantities, available electrical supply and destination country. Include the acceptance requirements and existing upstream or downstream equipment so the proposed scope can be reviewed.
Discuss your project with Haihui
Компания Xingtai Haihui Machine Tool Co., ООО. supplies rebar processing machinery from Renze District, Синтай, Хэбэй, Китай. Contact the factory to discuss a configuration for your own application and request a written quotation.
WhatsApp / Телефон: +86 13932960232 · 417786525@qq.com · Send an enquiry