Haihui HH4-16 آلة ثني ركاب حديد التسليح ذات خمسة رؤوس باللون البرتقالي

ماكينة ثني حديد التسليح ذات خمسة رؤوس: تخطيط تباعد الرأس وطول شريط U النهائي

إجابة سريعة: Select a five-head rebar bending machine by checking the required bend locations, head spacing, قطر الشريط, blank length, finished shape and batch mix. Use a dimensioned drawing and sample test to confirm that the head layout suits the actual job.

Map the bend positions from the drawing

Mark each bend center, leg length, hook direction and overall blank length. Compare the required positions with the machine bed and available head travel. Include the most common product and a shape near the limit of your planned work.

Review handling and changeover

Plan how bars are loaded, مدعومة, positioned and removed. Consider whether head positions change often between jobs and how operators will verify the setup. The production plan should include handling and first-piece checks, not just bending time.

Validate the configuration with a test piece

Ask the manufacturer to confirm the permitted bar range and test your material and drawing. Measure finished dimensions using agreed reference points, then retain the program and setup notes for repeat production.

الأسئلة المتداولة

Does more bending heads always mean higher output?

Not by itself. Output also depends on the part geometry, تحميل, head setup, material and batch size.

What should I include in an enquiry?

Provide drawings, diameter and grade, blank lengths, daily quantity, إمدادات الطاقة والوجهة.

الاتصال بآلات Haihui: هاتف / واتساب +86 139 3296 0232. Send a U-bar drawing for a head-layout review.

انتقل إلى أعلى