آلات لف خيط شريط الفولاذ Haihui HGS40 HGS50 مع علامة WhatsApp المائية +86 13932960232

ماكينة لف خيط حديد التسليح: تحديد طول الخيط, شريط الصف والتفتيش

إجابة سريعة: Specify a rebar thread rolling machine by bar diameter and grade, required thread profile or standard, طول الخيط, التحضير النهائي, daily volume and inspection gauge. Ask the supplier to confirm the die and configuration against the connector system used on site.

Identify the connection requirement

Provide the connector type, thread profile, pitch or standard, effective thread length and any project acceptance criteria. Do not rely on a generic description such as “standard thread” when a specific coupler system is required.

Match bar and tooling

List the rebar diameter and grade, end-preparation method and planned production mix. Confirm die sizes, setup range, lubrication or cooling requirements and included tooling. Ask how a sample will be measured and what gauge is recommended.

Plan inspection and repeatability

Agree the sample material, thread length measurement, gauge check and visual inspection criteria. Keep the approved sample and setup information with the production job card so repeated batches use the same reference.

الأسئلة المتداولة

Can one die cover several bar diameters?

Tooling is configuration-specific. Ask the supplier to list the dies required for each diameter and what is included in the quotation.

What should accompany an RFQ?

Send bar grades and diameters, thread profile, connector information, طول الخيط, هدف الإخراج, power and destination.

الاتصال بآلات Haihui: هاتف / واتساب +86 139 3296 0232. Send the connector specification for a tooling review.

انتقل إلى أعلى