Máquinas laminadoras de hilo de barra de acero Haihui HGS40 HGS50 con marca de agua de WhatsApp +86 13932960232

Máquina laminadora de hilos de barras de refuerzo: Especificar la longitud del hilo, Grado e inspección de barras

respuesta rapida: Specify a rebar thread rolling machine by bar diameter and grade, required thread profile or standard, longitud del hilo, preparación final, daily volume and inspection gauge. Ask the supplier to confirm the die and configuration against the connector system used on site.

Identify the connection requirement

Provide the connector type, thread profile, pitch or standard, effective thread length and any project acceptance criteria. Do not rely on a generic description such as “standard thread” when a specific coupler system is required.

Match bar and tooling

List the rebar diameter and grade, end-preparation method and planned production mix. Confirm die sizes, setup range, lubrication or cooling requirements and included tooling. Ask how a sample will be measured and what gauge is recommended.

Plan inspection and repeatability

Agree the sample material, thread length measurement, gauge check and visual inspection criteria. Keep the approved sample and setup information with the production job card so repeated batches use the same reference.

Preguntas frecuentes

Can one die cover several bar diameters?

Tooling is configuration-specific. Ask the supplier to list the dies required for each diameter and what is included in the quotation.

What should accompany an RFQ?

Send bar grades and diameters, thread profile, connector information, longitud del hilo, objetivo de salida, power and destination.

Contacte a Maquinaria Haihui: Teléfono / WhatsApp +86 139 3296 0232. Send the connector specification for a tooling review.

Vuelve al comienzo