HAIHUI · APPLICATION PLANNING CASE
This is an illustrative equipment application, not a report of a named customer order or verified operating results. The product image shows Haihui equipment, not an installation at the illustrative site.
Application at a glance
A component workshop needs formed flat-strip clamps that fit a specified pipe support and mounting arrangement. This application example links punching and bending decisions to the finished fit, without claiming a completed customer order.
| Article | Requirement |
|---|---|
| Finished component | A formed clamp or saddle based on an approved drawing |
| Material data | Strip width, épaisseur, grade and surface condition |
| Candidate equipment | Haihui HH100-20 flat steel hoop forming machine |
| Functional checks | Finished profile, mounting-hole relationship and agreed fit requirements |
Define the mating geometry
Specify whether the clamp fits a nominal pipe size or a measured outside diameter and identify any lining or clearance required by the approved design. Show strip dimensions, inner bend references, hole sizes and mounting distances. The machine supplier needs component geometry; it should not be expected to infer structural load requirements from a sample photograph.
Check the integrated process
The current HH100-20 listing combines roller straightening, servo feeding, hydraulic punching, forming and cutting. It lists 3–10 mm processing thickness, but strip width and steel strength remain subject to confirmation. A thickness match alone does not prove suitability for the clamp, particularly with different materials or coatings.
Inspect holes in the formed condition
For a proposed trial, check the hole positions relative to the finished profile after bending. Verify that the component fits the agreed mating dimensions or inspection fixture. Record the die set, material batch and setup. Clarify how any distortion near a bend will be assessed and what constitutes an accepted component.
Price the approved tool package
Identify tooling for each hole pattern and profile, along with included payoff equipment and consumables. The listed maximum feeding and bending speeds do not establish finished clamps per hour. Request a complete sample cycle covering punching operations, forming and handling, then confirm quotation scope and acceptance requirements in writing.
Related equipment and product category
Passez en revue le HH100-20 Flat Steel Hoop Forming Machine | Haihui for current product information, and browse the Machine à cerceaux en fer plat category. Model selection should be based on the actual material, drawing and agreed configuration.
Application FAQ
Does this application example establish the clamp’s load rating?
Non. Load requirements and component design need project-specific approval. This example concerns matching machinery and tooling to an approved component drawing.
What should I send Haihui for a similar application?
Send dimensioned drawings, material grade and sizes, target batch quantities, available electrical supply and destination country. Include the acceptance requirements and existing upstream or downstream equipment so the proposed scope can be reviewed.
Discutez de votre projet avec Haihui
Xingtai Haihui Machine-outil Co., Ltée. supplies rebar processing machinery from Renze District, Xingtai, Hebei, Chine. Contact the factory to discuss a configuration for your own application and request a written quotation.
WhatsApp / Téléphone: +86 13932960232 · 417786525@qq.com · Send an enquiry