HAIHUI · REBAR PROCESSING GUIDE
A two-head rebar bending center is considered for straight-bar reinforcement work involving coordinated bend locations. Haihui’s G2L32A page shows a moving bending head and an automatic feeding rack. Its detailed numerical capacities must be confirmed against the selected configuration and the actual part drawing.
Define the incoming blank and finished part
Provide straight blank length, diamètre de la barre, nuance d'acier, all bend positions and finished dimensions. Show how the part is oriented on the feed rack. If both ends require bends, specify which end provides the measuring reference and whether the finished dimensions are internal, external or centreline dimensions.
Confirm the proposed head sequence
Ask the supplier to explain which bends are made by each head and whether operations occur together or sequentially. Confirm the usable working range, head travel, tooling clearance and any repositioning for the drawing. The category name alone does not establish simultaneous processing, a particular angle range or the shortest part that can be produced.
Review feeding and support interfaces
The published G2L32A listing highlights motor control, une tête de pliage mobile et un support d'alimentation automatique à haute résistance. Ask for the actual feed method, loading arrangement and support layout in the quotation. If the machine follows a separate cutting station, confirm how cut bars are transferred and identified. Feeding equipment should be matched to the longest stock and expected batch sizes.
Use a part-specific production trial
Include a common job and a demanding job in the demonstration. Measure finished bend positions and dimensions, record material and setup, and include loading, unloading and changeover time. Do not derive throughput from head movement alone. Confirm material capacity, power requirements and control details because the current product page does not publish a verified numerical specification table.
Make the delivery scope explicit
Request a layout drawing, liste d'outillage, installation requirements and the agreed inspection method. Identify included racks, contrôles, accessoires, training and spare parts separately. Send the destination and workshop power supply so the export quotation can be based on a defined configuration.
Related Haihui equipment
Passez en revue le Centre de cintreuse de barres d'armature G2L32A and browse our Cintreuse de barres d'acier à deux têtes category for application information and configuration enquiries.
Questions fréquemment posées
Does G2L32A automatically prove a 32 mm capacity?
Non. The current page requires the supported bar range and material compatibility to be confirmed; do not infer capacity from the model code.
Does a two-head center replace a coil-fed stirrup machine?
They address different material workflows. Select using incoming stock, part geometry and handling needs rather than the number of heads.
Request a drawing-based quotation from Haihui
Xingtai Haihui Machine-outil Co., Ltée. supplies reinforcement processing machinery from Renze District, Xingtai, Hebei, Chine. Send your part drawing, spécification matérielle, objectif de production, power supply and destination for a configuration review and quotation.
WhatsApp: +86 13932960232 · 417786525@qq.com · Contacter Haihui