HAIHUI · APPLICATION PLANNING CASE
This is an illustrative equipment application, not a report of a named customer order or verified operating results. The product image shows Haihui equipment, not an installation at the illustrative site.
Application at a glance
A cage drawing calls for a closer spiral pitch near the ends and a different pitch through the middle. This application plan explains the information needed to review a cage winding arrangement; it does not assert that every listed machine automatically programs pitch transitions.
| غرض | Requirement |
|---|---|
| Cage requirement | End zones and a middle zone with separately specified pitch |
| Drawing references | Zone boundaries, pitch definition and cage diameter reference |
| Candidate equipment | آلة لف القفص الفولاذي Haihui |
| Configuration question | Which movements are controlled and which adjustments require operator intervention |
Mark the transitions on a single drawing
State winding-wire grade and diameter, cage diameter, longitudinal bar arrangement and full cage length. Dimension the beginning and end of each pitch zone from a clear reference. Identify whether “spacing” means axial pitch between corresponding turns or the clear gap. Those measurements are not interchangeable.
Ask the supplier to explain the proposed method
For the selected configuration, confirm how cage rotation, support travel and wire feed are coordinated. Ask whether pitch changes can be programmed, require a stop or need another operating procedure. Obtain written confirmation for the exact two-zone drawing. A category description or a short constant-pitch video does not establish this capability.
Include the joining operation in the scope
Define how the spiral is to be secured to the longitudinal bars and which joining equipment is supplied. Winding and welding are distinct functions. If a separate welding station or operator task is needed, include its space, handling and cycle time in the proposed workflow. Do not assume automatic welding from a winding-machine listing.
Inspect all zones and both transitions
A useful trial would measure pitch in both end zones, the middle and around each transition. Check cage dimensions after it leaves the supports and record the material and settings. Include loading, يثبت, joining and removal when assessing capacity. The result sought is a repeatable acceptance record, not an unsupported output claim.
Related equipment and product category
قم بمراجعة آلة لف القفص الفولاذي Haihui for current product information, and browse the Rebar cage winding machine category. Model selection should be based on the actual material, drawing and agreed configuration.
Application FAQ
Can Haihui confirm a two-zone winding requirement from a photograph alone?
A dimensioned cage drawing with wire specification, zone boundaries and pitch definitions is needed for a useful configuration review.
What should I send Haihui for a similar application?
Send dimensioned drawings, material grade and sizes, target batch quantities, available electrical supply and destination country. Include the acceptance requirements and existing upstream or downstream equipment so the proposed scope can be reviewed.
Discuss your project with Haihui
شركة شينغتاي هايهوي للأدوات الآلية المحدودة, المحدودة. supplies rebar processing machinery from Renze District, شينغتاى, خبي, الصين. Contact the factory to discuss a configuration for your own application and request a written quotation.
واتساب / هاتف: +86 13932960232 · 417786525@qq.com · Send an enquiry