HAIHUI · APPLICATION PLANNING CASE
This is an illustrative equipment application, not a report of a named customer order or verified operating results. The product image shows Haihui equipment, not an installation at the illustrative site.
Application at a glance
A precast-pile workshop wants a repeatable specification for spiral reinforcement across recurring orders. This illustrative application focuses on a controlled drawing and inspection template rather than reporting an unverified customer installation.
| غرض | Requirement |
|---|---|
| Finished part | Continuous spiral reinforcement for a project-approved pile design |
| Primary dimensions | Defined spiral diameter, axial pitch, turn count and end conditions |
| Candidate equipment | Haihui steel spiral reinforcement forming machine |
| Selection limit | Material range and complete geometry require configuration confirmation |
Create one controlled spiral specification
Record bar grade and diameter together with the spiral’s inside, outside or centreline diameter reference. Define the axial pitch, number of turns and overall geometry without leaving end turns implicit. If different drawings use different dimension references, resolve them before the factory prepares tooling or a trial.
Review product options against the full requirement
Haihui’s spiral category includes different equipment options. The 12–22 mm designation on the referenced product is not confirmation of every possible spiral diameter, pitch or material. Send the complete template to Haihui and ask for a written statement of the supported geometry, required tooling and operating method.
Develop a reproducible sample check
After forming, measure the spiral in an agreed supported condition. Record how diameter and pitch are assessed and which end features are inspected. Keep the material identity and setup with the sample report. This makes later comparisons meaningful when a new material batch or job setup is introduced.
Plan storage and transport of the spiral
Ask how the finished reinforcement will be collected, supported and packed. If compression or bundling is proposed, confirm the inspection condition before packing and after release. Cage assembly, joining and final reinforcement acceptance are separate requirements. Include removal and handling time when evaluating the proposed forming capacity.
Related equipment and product category
قم بمراجعة هايهوي 12-22 آلة تشكيل التسليح الحلزوني الفولاذي الأوتوماتيكية for current product information, and browse the آلة تشكيل الأضلاع الحلزونية category. Model selection should be based on the actual material, drawing and agreed configuration.
Application FAQ
Can a nominal bar range replace a spiral drawing?
لا. Finished diameter, يقذف, end geometry, material grade and handling requirements are all needed for configuration review.
What should I send Haihui for a similar application?
Send dimensioned drawings, material grade and sizes, target batch quantities, available electrical supply and destination country. Include the acceptance requirements and existing upstream or downstream equipment so the proposed scope can be reviewed.
Discuss your project with Haihui
شركة شينغتاي هايهوي للأدوات الآلية المحدودة, المحدودة. supplies rebar processing machinery from Renze District, شينغتاى, خبي, الصين. Contact the factory to discuss a configuration for your own application and request a written quotation.
واتساب / هاتف: +86 13932960232 · 417786525@qq.com · Send an enquiry