إجابة سريعة: Test a curved automatic rebar stirrup bending machine with a written sample specification: الصف المادي, القطر, رسم, target dimensions and agreed tolerances. Inspect the finished piece and record the machine configuration and test result before shipment.
Agree the test before production
Choose a representative shape from your project drawings and send it to the manufacturer in advance. Confirm the material and bar size, the dimensions to be measured, the acceptable tolerances and the number of samples. Identify any special requirements for packaging, documentation or remote inspection.
What to observe during the trial
Check that the machine shown is the quoted model and configuration. Observe material feeding, تحديد المواقع, bending and cutting where applicable. Look for clear operating steps and confirm that the selected tooling corresponds to the test shape. Ask the supplier to show the machine nameplate and relevant configuration details during a remote video inspection.
Measure the finished sample
Compare overall dimensions, straight legs and curve geometry with the approved drawing. Note the measurement method and record the results. A visually plausible sample is not enough if the project requires defined tolerances. If an issue appears, document it and agree on corrective action and a repeat test.
Keep a written acceptance record
Store the approved drawing, تكوين الآلة, test date, التفاصيل المادية, sample measurements, photos or video, and any agreed exclusions with the purchase documents. Confirm who is responsible for final inspection, packing evidence and after-sales support.
الأسئلة المتداولة
Can a video replace a factory visit?
A live or dated video inspection can help when travel is not practical, especially when it shows the machine identity, test process and measured sample. Agree the evidence needed before the test.
Should the test use my exact steel grade?
When feasible, test with the project material or a clearly identified equivalent, and document any difference.
اسأل هايهوي: شركة شينغتاي هايهوي للأدوات الآلية المحدودة, المحدودة. يقع مقرها في شينغتاى, خبي, الصين. Share your rebar diameter, درجة الصلب, target shape, daily output and destination country for a suitable configuration and quotation. واتساب: +86 139 3296 0232.